第1篇 高級管道設計師崗位職責
1.summary概述
the senior piping engineer is based in shenyang, china, responsible for regulatory code compliance and quality of piping engineering deliverables. the senior piping engineer resolves piping technical issues and provides guidance to other piping practitioners as well as supervising and coordinating piping engineering tasks.
高級管道工程師負責為赫氏中國沈陽辦公室崗位,該崗位確保管道工程交付成果符合法規標準和質量要求。高級管道工程師解決管道技術問題,為其他管道工作人員提供指導,并負責監督和協調管道工程任務。
2.key responsibilities主要職責
ensure that all work designed or supplied by the piping engineering discipline complies with the relevant sections of mandatory health and safety standards, including any pressure piping regulation or code referred to within the required jurisdiction for the project with due consideration of relevant client engineering standards
確保管道專業全部設計和工作符合強制性健康和安全標準相關章節的規定,包括項目要prepare and approve design calculations
準備和批準設計計算書
prepare a list of engineering deliverables to facilitate the planning and control of the engineering budget
manage and review the piping engineering work packages associated with all deliverables to ensure that budgets and schedules are being met and take corrective action if necessary
管理和審核全部與管道工程設計工作包有關的設計交付,確保滿足預算和進度要求,并在必要時采取糾正措施
prepare, review and approve piping technical deliverables
準備、審核和批準管道技術交付成果
requisition piping components, provide technical evaluation and review of supplier data
采購管道組件,提供供應商數據的技術評估和審核
assist in the preparation and development of project specific procedures
協助準備和開展項目具體程序
manage piping system requirements to achieve the project results and monitor effectiveness
管理管道系統要求,以實現項目成果和監督效果
facilitate piping discipline engineering meetings
推動管道專業工程會議
ensure coordination between the piping team and other disciplines of all activities being performed as the design evolves
在設計的過程中,確保管道團隊和其他專業之間全部協調工作
ensure that quality audits of engineering work are carried out in accordance with project/hatch procedures and maintain technical documentation
確保工程設計工作的質量審核按照項目/赫氏程序進行,維護技術文檔
participate in hazop reviews
參與危險和可操作性分析審核
provide input to proposal and man-hour estimates
提供建議書和人工時估算輸入
ensure resolution of piping issues during project lifecycle, including planning phase, design, procurement, fabrication, construction and commissioning
確保在項目生命周期內解決管道問題,包括規劃階段、設計、采購、制造、建造和試車。
promote and maintain the application of ethical and professional practices in the e_ecution of piping engineering work
在管道工程設計工作過程中推進和維護道德和專業實踐應用
3.qualifications and e_perience資歷和經驗
essential必備條件
bsc/b. eng degree in mechanical engineering or equivalent
機械工程理科/工科學士或相關專業
minimum eight years piping engineering e_perience with a minimum five years project engineering e_perience or equivalent relevant e_perience
至少8年管道工程經驗,至少5年項目工程經驗或同等相關經驗
strong deliverable focus, ability to plan and delegate work
密切關注可交付成果,計劃和委派工作的能力
a high degree of understanding of interdisciplinary dependencies related to the discipline
高度理解與管道專業相關的跨專業之間的相關性
good understanding of procurement, contracting and commissioning methodologies
對采購、合同和試車方法具有良好理解
good understanding of systems and workflows as they relate to the piping discipline
對與管道專業相關的系統和工作流程有良好理解
sound knowledge of piping codes and standards applicable to the project
對項目適用的管道規范和標準有深刻理解
sound technical knowledge of piping engineering, including specifications, calculations p&id development, line sizing, material selection, isolation requirements, valve selection and requisitioning of piping components
擁有管道工程設計良好的知識體系,包括編寫規格書和計算書、管道儀表流程圖開發、管道尺寸計算、材料選擇、保溫設計、閥門選型和管道部件要求
familiarity with the requirements and application of pipe stress analysis
熟悉管道應力分析的要求和應用
knowledge of advanced piping systems
具備高級管道系統知識
site e_perience in a piping technical role
具備管道技術崗位的現場經驗
e_perience in the technical review of vendor drawings and supplier data.
具備供應商圖紙和供應商數據技術審核經驗
bilingual中英文雙語可以作為工作語言
preferred優先考慮
e_perience working on large projects in a multidisciplinary environment
具備多專業環境下大型項目的工作經驗
e_tensive knowledge of 3d data centric design systems
具備3d數據中心設計系統豐富知識
e_perience in mentoring engineers and designers
指導工程師和繪圖設計師的經驗
e_tensive e_perience in the use of procedures and workflows in the e_ecution of projects
在項目執行過程中使用程序和工作流程的豐富經驗
strong client focus
較強的客戶關注能力
workshare projects
曾從事過工作共享項目
第2篇 管道設計師崗位職責
管道設計師 中國電子系統工程第二建設有限公司 中國電子系統工程第二建設有限公司 說明:該崗位僅針對____年屆碩士應屆生;
【任職要求】
1、專業要求:給水與排水工程等相關專業;
2、____年屆碩士畢業生,要求通過國家英語四級考試(成績在425分及以上);
3、熟練使用cad、office等辦公軟件,熟悉bim軟件優先;
4、學習成績優秀,具備良好的溝通與抗壓能力,具有團隊協作和吃苦耐勞的精神。
第3篇 工藝管道設計師崗位職責
1.本科學歷,至少一年以上化工裝置布置與管道布置設計經驗,有設計院工作經驗優先。
2.具有團隊合作精神,頭腦靈活,溝通能力與學習能力強。
3.具有很強的領導力與溝通力,管理公司的項目團隊。
4.入職后公司提供專業培訓,上五險一金,有補助和項目獎金。
5.優秀應屆畢業生可應聘。
