sta工程師崗位職責7篇

第1篇 installation liaison engineer/安裝聯絡工程師崗位職責描述崗位要求

職位描述：

職責描述：coordinate with fal installation engineer on-site at customers final assembly line factory about the ewis installation issue／在客戶總裝現場與總轉安裝人員協調總裝安裝阿題

identify the related engineering issue according to fal ewis installation issue／根據總裝的安裝題反饋來識別出和工程相關的問燃

provide and coordinate the engineering solution for fal ewis installation issues／針對總裝安裝阿題提供工程解決方案

coordinate with installation engineer about the solution validation／與總裝安人員調工程解方案的確認

第2篇 testassistant測試技術員/助理工程師崗位職責職位要求

職責描述：

崗位職責：

support in the dvt testing of led driver power supply-electrical visual/auval & technical test

主要負責電源產品dvt測試及元件應力測試

職位要求：

1.graduate of electrical/electronics；

2.at least 1 years working erperience in elactrical /electronics relate products

3.know cros of officein micros of office-work e_cel，ppt;

4.preference for hand on-need to perform soldering &desoldering electrical/electronic components;

5.willingness to do overtime

6.can speak/write basic english

崗位要求：

學歷要求：本科

語言要求：不限

年齡要求：不限

工作年限：1-3年

第3篇 高級全棧工程師--senior full-stack software developer職位描述與崗位職責任職要求

職位描述：

essential duties and responsibilities

?analyzing， designing， programing， debugging， and modifying software enhancements and/or new features for cms product.

?automation and manual test for software quality.

?fi_ing defects and handling issues for end customers.

?joining scrum team and following the agile development practices.

?completing documentations and procedures for installation and maintenance.

essential attributes

?good sense of development principles， coding standards， and design patterns.

?desiring to understand product from end users’ perspectives.

?demonstrating time management， problem solving， presentation， and organizational skills.

?operating effectively under moderate to limited supervision.

?outstanding learning skill to shorten the learning curve.

?strong communication skills， ability to communicate professionally with peers.

?ability to work in a high-pressure environment involving large sales deals.

required knowledge and work e_perience

?5 years or above hands-on software development e_perience is a must.

?bachelor or master degree in computer science， information system， software engineering or equivalent.

?significant e_perience with j2se， j2ee is a must.

?junit/ mock frameworks e_perience a must.

?capability in analyzing requirement， driving software design is a plus.

?e_perience with web based technologies (html5， re-act js， jsp， dhtml， css).

?e_perience with database technology (sql， pl/sql， jdbc， oracle/mssql/postgresql).

?e_perience with design/develop scalable and robust java-based systems.

?e_perience with svn or git.

?e_perience in agile development practice.

?good sense of customer facing.

?good oral and written english.

第4篇 senior wire installation design engineer/高級線束安裝工程師崗位職責描述崗位要求

職位描述：

職責描述：

position objective / 職位目標: (clearly define this position main objective for the company) / (詳細地定義本職位在公司的主要目標)

interface with e_ternal and internal customers to develop and maintain wire harness detail， installation， and bundle assembly. creates solutions for 2d and 3d wire harness installation designs and incorporates changes to design plan. / 與外部和內部的客戶配合，對線束細節圖，安裝和線束裝配進行開發和維護。繪制線束安裝2d和3d設計圖，并對設計方案進行修改完善。

responsibilities and activities /責任與活動: (clearly define main responsibilities and activities for this position) / (詳細地定義本職位的責任與活動)

main function responsibilities and activities / 本職位的主要責任以及職能 :

? develops and maintains wire harness physical design and installation through the use of 3d wire harness installation models， wire harness assembly models and 2d formboard drawings / 通過使用3d線束安裝模型，線束裝配模型與2d布線板圖紙，對線束的實際設計與安裝進行開發和維護

? supports analysis and design reviews / 為分析與設計審核提供支持

? perform assigned tasks meeting the organization's e_pectations for quality， schedule and process compliance / 完成分配的任務，保證符合機構的質量預期，時間表和流程要求。

? applies program technical requirements to design work requirements， processes， and tasks / 將項目技術要求應用到設計工作要求，工藝和任務當中

? supports the development of processes， methods， and tools that support the design process / 對有助于設計流程的流程，方法和工具的開發提供支持

? communicate and/or implement design solutions / 對設計解決方案進行溝通和實施

? investigate and resolve design issues / 調查與解決設計相關問題

? develops solutions to comple_ problems， which require ingenuity and innovation / 運用獨創性與創新性，找到復雜問題的解決方案

? other duties may be assigned / 其他可能分配到的任務

? ensure that the tasks assigned are done on time and according to the quality criteria / 保證按時完成分配到的任務，并符合質量標準

職位要求：

a. educational qualifications /教育資格

? bachelor’s degree in electrical， mechanical， or aerospace engineering， or equivalent / 電氣，機械或航空工程相關領域?qū)W士或同等學歷

b. work e_perience - technical knowledge / 工作經歷 - 專業知識

? typically has at least 2 years of e_perience in harness design/ 通常需要至少2年以上線束設計經驗

? e_perience in electrical installation design / cad / 具備電氣安裝設計/ cad經驗

? ability to learn and work with ms office computer applications / 學習能力，和使用微辦公軟件的能力

? fluent in english (written and verbal) / 流利的英文口語及書面表達能力

第5篇 staff analog/mi_ed signal design engineer （資深模擬/混合ic設計工程師）職位描述與崗位職責任職要求

職位描述：

崗位職責：

1）參與制定芯片和模塊的specification

2) 負責模擬和混合信號ic電路的設計和仿真

3）負責與版圖工程師溝通并完成電路的版圖設計

4）制定芯片的測試計劃，并在流片后配合芯片測試

5）負責芯片設計過程中相關設計文檔的寫作

6）負責與ic foundry公司的溝通

崗位要求：

1）碩士及以上學歷，五年以上相關工作經驗

2）熟悉模擬和混合信號ic電路的設計和仿真（例如pll/ldo/osc等，以及mipi/hdmi/usb等外設接口的phy）

3）熟悉cmos工藝模擬集成電路設計、流片和測試流程

4）掌握specification， datasheet， test plan， design review等技術文檔的寫作

5）熟悉linu_ os系統以及cadence spectre， hspice， hsim等設計軟件的使用

6）熟悉layout guide，協助版圖工程師進行電路版圖設計

7）有良好的英語溝通能力，與美國和國內工程師共同完成芯片開發

第6篇 assistant simulation engineer助理仿真工程師職位描述與崗位職責任職要求

職位描述：

job description:

1.hydrodynamic simulation with for combustion engine bearing system

2.finite element analysis for combustion engine bearing system

3.hydrodynamic simulation for tribology system

4.fea for tribology system

5.data post processing and reports writing

6.other tasks assigned by supervisor

job responsibilities:

1.bachelor degree and above， master degree is preferred

2.education background: mechanics， kinetics， dynamics， hydrodynamics， hydromechanics

3.knowledge of engine crankshaft system

4.e_perience of 3d drawings software， pro/e or similar software

5.e_perience of using avl e_cite or other similar software is preferable

6.e_perience of abaqus， hypermesh

7.2 years of simulation e_perience

第7篇 staff software engineer 資深軟件工程師職位描述與崗位職責任職要求

職位描述：

一、工作內容

1. 理解公司自研芯片的編程模型

2. 理解公司自研算法的計算結構

3. 開發自動映射編譯器完成自研算法到自研芯片上的可執行固件

二、任職要求

1. 計算機、電子信息工程、自動化、電子科學與技術專業碩士+8年工作經驗；或博士+3年工作經驗

2. 扎實的計算機科學相關理論基礎

3. 理解任意片上并行計算系統的主要結構和編程模型

4. 有任意一種并行開發框架的驅動級使用經驗（例如cuda）

5. 在c/c++/python/java四者中精通任意一門